Attaching base profile seals

For partial bonding of the base profile seal, degrease it on the back and press it into the groove of the base profile.
Avoid silicone spray and other lubricants at all costs before bonding.
Cut off the protruding profile seal to the required length. Cut off the seal on the bottom of the profile exactly at right angles to ensure tightness to the ground.

Note

The base profile seals of the wall profiles must be protected against soiling and UV radiation, e.g. by using covers.
The barrier panels with built-in seals must be protected against soiling and UV radiation, e.g. by storing the barrier panels on the wall bracket and attaching a storage casing.

Attaching a base profile seal

Note