- Suitable forklifts or construction cranes should be used for loading and unloading the profiles (with a lifting strap where necessary).
- The packaging around the profiles must be protected against mechanical damage and against the harmful influences of moisture and atmospheric conditions.
- Extruded profiles must be stored dry.
- If you are storing the profiles outside, please ensure that they are covered and sufficiently ventilated.
- In order to avoid warping, the profiles should be supported at several points along the entire length (e.g. using wooden slats) so that they are lying flat.
- Do not place heavy objects on the profiles and do not stack pallets on top of each another.
- Immediately after receiving your delivery: check the pallet and packaging for visible damage.
- When unpacking, check the extruded profiles for damage.
- The profiles must be packed and unpacked in a clean area.
- Lift profiles and do not pull or push them over edges in order to avoid damaging them.
