Information
PREFA gutters have been tried and tested for decades and their appeal lies in their well-thought-out, detailed technical solutions. Thanks to the proven surface treatment, they remain functional and attractive for many years. PREFA gutters are produced from powder-coated aluminium strips. Alloys according to EN 573 or DIN 1725 make up the basic material for this.
Advantages of PREFA gutters
- Surface treatment in a coil-coating procedure
- Corrosion-free and long service life thanks to aluminium
- Tested original quality
- Resistant to constant temperatures of between –30 °C and +80 °C
- Can be used creatively thanks to a range of 12 colours plus additional special colours (on request)
- Particularly low maintenance
- Comprehensive gutter accessories
Colour overview (13)
The product is available in the following colours
Colour |
Code |
~ RAL |
|
P.10 brown |
7013 |
|
P.10 anthracite |
7016 |
|
P.10 black |
9005 |
|
P.10 light grey |
7005 |
|
P.10 prefa white |
9002 |
|
P.10 nut brown |
8019 |
|
P.10 dark grey |
7043 |
|
brick red |
8004 |
|
oxide red |
3009 |
|
moss green |
6005 |
|
zinc grey |
7030 |
|
metallic silver |
9006 |
|
plain aluminium |
Notes
- The RAL values stated are merely approximate values (~), some of which may differ vastly from the original PREFA colour and, under certain circumstances, may not reflect the subjective perception of the colour.
- Above all for colour quality P.10, it is almost impossible to define values due to the surface structure.
- Plain aluminium: The guarantee does not cover surface appearance alterations caused by processing and environmental influences. Follow the instructions.
- Metallic colours may vary in shade.
- To identify exact colours for complementary components please consult original samples.
Technical information
The coating layer is malleable and protected against general chemicals and weather conditions. The coil-coating process is subject to strict quality controls.
In addition, the long-term behaviour is analysed in salt spraying, condensation and water immersion tests.
Temperature resistance |
Between –30° and +80° |
|---|---|
Quality controls |
layer thickness, gloss level, shade, paint hardness, paint adhesion, paint bonding, deformation resistance, paint hardening |
Gutter dimensions (piece lengths: 3 m and 6 m) |
250, 280, 333, 400 |
Aluminium downpipe (piece length: 3 m) |
Ø 60 mm, Ø 80 mm, Ø 100 mm, Ø 120 mm, Ø 150 mm
|
Planning and installation
More product information is available for downloading here
Accessories
Gutter bracket
250, 280, 333, 400
Upright gutter bracket
280, 333, 400
Gutter bracket (Switzerland)
333
Fascia bracket
250, 280, 333
Gutter end cap
250, 280, 333, 400; can be used on both sides
Radius end cap
333; ca be used on both sides
Adhesive end cap
333; can be used on both sides
Gutter corner 90° (internal)
250, 280, 333, 400
Gutter corner 90° (internal)
250, 280, 333, 400
Gutter outlet
250, 280, 333, 400
Diagonal outlet
250, 280, 333, 400; can be used on both sides
Gutter expansion joint with bead and cover plate
250, 280, 333, 400
Gutter expansion joint without bead or cover plate
250, 280, 333, 400
Reinforcement hanger for aluminium gutter
250, 280, 333, 400
Eaves drip edge
230 × 2.000 × 0,70 mm
