PREFA aluminium strips and metal sheets are made from malleable aluminium alloys. This makes them easy and safe to work with – ideal for gable and valley constructions, chimney and roof window flashings, dormer cladding and much more. PREFA aluminium strips and metal sheets can also be used in the façade area (e.g. on window ledges and corners).
Thanks to the wide choice of colours, you can always find the matching shade for a high-quality look – particularly in combination with PREFA’s powder-coated gutters. The coating is applied in a coil-coating process and is permanently weather-resistant. And as an aside, flashing strips and sheets are also available in the required paint quality for PREFA’s tried and tested long-term roof.
Do not combine strips and sheets with other colour aluminium strips due to the different paint qualities and folding abilities. On NON-PREFA roofs, flashing for valleys, gables, chimneys and roof surfaces, etc. should only be produced using colour aluminium strips.
1.100 mm, 1.200 mm
Complementary façade metal sheets
complementary façade metal sheets for use with siding, siding.X and PREFABOND aluminium composite panels
Colour aluminium coil with polyester coating
for claddings, flashings and cappings; not suitable for use as complementary coils on PREFA roofs and façades
Colour aluminium sheet in polyester quality
with and without protective film
Aluminium coil plain aluminium
Perforated metal plate
with round perforations Ø 5/7 mm
with square perforations 6 mm, in the colours brown/anthracite and light grey/light grey, dimensions: 1,00 × 250 mm and 1,00 × 333 mm
125 × 2.000 × 0,7 mm, with round perforations Ø 5/7 mm
Joint connector plate uncanted
PREFA design wave (transverse, 6 mm); 0,70 × 550 × 2.000 mm